So I saw some of the pictures of the vortex Diatron that were on Amazon and this really intrigued me. I got to wondering how they might work. After a little while I came up with a relatively sound idea of the inner workings of the diatron. here are the pictures of the diatron.
I will do my best to explain how I feel the new Diatron works. To help me in this I will use the proton as a reference point.
So let's begin. The Diatron will have two sleds or barrels. They will be stacked one on top of the other. This can be seen by the size of the opening on the front of the diatron. The diatron will also be sporting two torsion spings much like the ones seen in the proton. The torsion springs will be parallel to one another. There will be two arms as well (no duh Sherlock) the arm that will go on the left will be shorter and will fire the disc in the bottom barrel/sled. The right arm will be slightly longer and will fire the top barrel/sled. In order for this to work a groove will have to be cut out in the bottom barrel/sled to allow the second arm to swing and fire the disc in the top barrel.
As far as how the blaster is loaded I believe it will be very similar to the vigilon.
That is about as far as I got on speculating. If you have any questions or comments please post them below. let me know your thoughts on the vortex diatron.